Huber + Suhner - Connectors


Cables

Board-to-board Connectors: MMBX, MBX

Board-to-board Connectors: MMBX

Board-to-board Connectors: MMBX

HUBER+SUHNER MMBX connectors are especially developed for board-to-board and board-to-module RF interconnections. Along with MBX the board-to-board portfolio of HUBER+SUHNER provides highest flexibility for today´s and future radio module applications. MMBX connectors offer an operation frequency up to 12.4 GHz. The serie contains of a wide range of board and cable connectors with a minimum board-to-board distance of only 6.7 mm.
Board-to-board Connectors: MBX

Board-to-board Connectors: MBX

HUBER+SUHNER MBX connectors are especially developed for board-to-board and board-to-module RF interconnections. The mechanical design is outstanding, allowing the MBX to cope with mechanical misalignment in radial and axial directions and still hold an excellent electrical performance. MBX completes the board-to-board assortment of HUBER+SUHNER with its development based on the well-known board-to-board connector MMBX. MBX fulfils higher requirements with best in class axial misalignment of ±1.2 mm. MBX is the answer to higher integration and miniaturisation. It is the perfect solution for multiple connections from board-to-board / board-to-module and complex stack-ups in radio module applications.

Microminiature Connectors MMCX, MMPX

Microminiature Connectors MMCX

Microminiature Connectors MMCX

HUBER+SUHNER MMCX connectors are intended for use in applications where the smallest dimensions have to be achieved. These connectors can be used in applications from DC to 6 GHz. The reliable ”snap-on” coupling mechanism ensures that the electrical parameters are consistently reproduced. Due to its non-slotted outer contact, the MMCX series provides a low RF-leakage. In addition, HUBER+SUHNER SMT MMCX connectors fully meet today’s SMT (Surface Mount Technology) requirements with superior design, material selection and packaging. The HUBER+SUHNER SMT connectors are suitable to all reflow-soldered SMT -PCBs where impedance matching or screened signal transmission is necessary.
Microminiature connectors MMPX

Microminiature Connectors MMPX

The Snap-on connector family MMPX is the most ideal coaxial-to-PCB system solution for operating frequencies up to 67 GHz and data rates up to 80 Gbps. The comprehensive product range consits of cable connectors and assemblies, PCB connectors and adapters to open standards. MMPX connectors feature excellent electrical performance at smallest mechanical dimensions. The broadband characteristics, the small size and the outstanding performance permit new solutions for applications in numerous markets such as high speed digital testing and radio frequency testing (60 GHz WPAN), industrial, mobile communication, space and defence.

Subminiature Connectors: MCX, SMB, SMC, SMS

Subminiature Connectors: MCX

Subminiature Connectors: MCX

HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size,weight, durability and performance for applications such as mobile and fixed telecommunications, in GPS applications and in Test+Measurement systems for testing instruments and apparatus. They are designed for frequencies up to 6 GHz and are tested according to the international standard CECC 22220. And they meet all the high requirements that micro coaxial connectors are expected to satisfy today. The HUBER+SUHNER subminiature connectors series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
Subminiature Connectors: SMB

Subminiature Connectors: SMB

HUBER+SUHNER SMB subminiature connectors are suitable for applications from DC up to 4 GHz. The SMB snap-on mechanism provides a fast and reliable connection for applications with high packing density.
Subminiature Connectors: SMC

Subminiature Connectors: SMC

The HUBER+SUHNER SMC subminiature connector series is based on the same design as the SMB and SMS series. But due to its screw-on coupling mechanism, the HUBER+SUHNER SMC subminiature connectors are suitable for applications up to 10 GHz.The SMC screw-on mechanism permits a vibration-proof connection suitable for semi-permanent connections and for use in mobile equipment with low VSWR requirements.
Subminiature Connectors: SMS

Subminiature Connectors: SMS

HUBER+SUHNER SMS connectors are used in applications requiring rapid connection and discon-nection, even where space is limited. The small physical size of the connector allows a high packing density to be achieved. These connectors are suitable for applications up to 4 GHz.

Precision Connectors: SMA, PC 1.85 and 3.5, SK

Precision Connectors: SMA

Precision Connectors: SMA

HUBER+SUHNER SMA connectors are precision connectors for microwave applications up to 18 GHz. The extended frequency version operates with excellent return loss performances up to 26.5 GHz. There is a huge variety of applications for HUBER+SUHNER SMA connectors, as in telecom, test+measurement, instruments, avionics, etc. The HUBER+SUHNER series SMA is classified into two categories: •HUBER+SUHNER standard SMA connectors for high end applications or applications subject to rough conditions. •HUBER+SUHNER® ECO SMA connectors for high volume applications
Precision Connectors: 3.5

Precision Connectors: 3.5

HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 33 GHz. They are especially suitable for use with semi-rigid cables and microwave components. They are intermateable with SMA and SK connectors. Due to an air dielectric interface and the more durable construction a superior repeatability further enhances the performance.
Precision Connectors: SK

Precision Connectors: SK

BER+SUHNER SK (2.92mm) connectors are precision connectors for microwave applications up to 40 GHz. They are intermateable with series SMA and PC 3.5. They have a high mechanical stability and an excellent repeatability. The shortened male pin ensures a non-destructive mating process. The glass beads, when used in conjunction with the SK launchers, enable the connectors to be replaced without disturbing the hermetic seal. For a mechanical decoupling between glass bead and internal microwave circuit, stress relief contacts are available.
Precision Connectors: 1.85

Precision Connectors: 1.85

HUBER+SUHNER PC 1.85 connectors are precision connectors for use in microwave applications up to 65 GHz. The connectors feature best electrical performance, excellent mechanical stability as well as extreme reliability. They are particularly well suited for semi-rigid, semi-flexible and flexible microwave cables. PC 1.85 is intermateable with PC 2.4 and is according to IEC 1.85 mm standard 60169-32.
Key features: Broadband characteristics from DC to 65 GHz, excellent return loss, robust design and perfectly matched cable entries for HUBER+SUHNER microwave cables.

Coaxial Inserts: 1.0/2.3

Coaxial Inserts: 1.0/2.3

Coaxial Inserts: 1.0/2.3

HUBER+SUHNER coaxial ”inserts” 1.0/2.3 are suitable for the insertion of mixed layout connectors DIN 41612 (pattern M). These inserts feature a slide-on coupling mechanism, which ensures a short connect-disconnect time. Impedance accuracy, fast and easy assembly as well as high reproducibility due to the full crimp cable entry are typical characteristics of these H+S connectors. The 1.0/2.3 inserts are suitable for applications up to 4 GHz.

Quick Latch Connectors: QLA

Quick Latch Connectors: QLA

Quick Latch Connectors: QLA

The QLA 00 series contains connectors with a quick latch coupling mechanism: connection is achieved by simply pushing the plug into the jack. 3 latching springs automatically engage, thereby securing the mated connectors against axial forces. No twisting action is required. The connectors are easily released by slightly pulling back the outer sleeve of the plug. This coupling mechanism provides a fast and reliable connection for applications up to 1.4 GHz. All connectors of the series QLA 00 are without any restrictions intermateable with Lemo series 00.250.

Blind Mate Connectors: BMA

Blind Mate Connectors: BMA

Blind Mate Connectors: BMA

HUBER+SUHNER BMA blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of connectors for fixed as well as “floating” configurations with any axial or radial misalignment taken out by the outer contact of the jacks. The BMA series presents an outstanding range of products featuring high reliability and ease of assembly. The HUBER+SUHNER range of BMA connectors is fully compatible with the OSP connector series.

QLF- Quick lock Connectors: QMA, XQMA, QN, XQN

QLF- Quick Lock Connectors: QMA

QLF- Quick Lock Connectors: QMA

HUBER+SUHNER QMA coaxial connectors are according to QLF standard and are available with 50 Ω impedance. The frequency range extends to 18 GHz, depending on the connector and cable type, however most of the QMA connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the SMA dimension, but, instead of a threaded coupling mechanism, a new snap-lock mechanism is used. The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, helping customers to save significantly time during production. The packaging density of QMA is increased compared to SMA connectors thanks to the fact that no torque spanner is required to fasten the coupling nut. QMA is not intermateable with SMA. QMA connectors are also available as waterproof version (IP 68) and are compatible with QLF standard.
QLF- Quick Lock Connectors: XQMA

QLF- Quick Lock Connectors: XQMA

HUBER+SUHNER XQMA (the QMA eXtreme) is the advanced version of the waterproof QMA, combining the quick lock mechanism and waterproof properties also in rough environmental conditions. The coupling mechanism is completely waterproof (IP68) and not only the RF signal path, thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity and low temperature.
QLF- Quick Lock Connectors: QN

QLF- Quick Lock Connectors: QN

HUBER+SUHNER QN coaxial connectors are available with 50 Ω impedance. The frequency range extends to 11 GHz, depending on the connector and cable type, however most of the QN connectors are return loss optimised for frequencies up to 6 GHz. The interface is based on the inner dimensions of the N connector, but, instead of a threaded coupling mechanism, a snap-lock mechanism is used. The QN interface has a very similar performance to N, but in addition it offers an easier, faster and safe coupling operation, helping the customers to save significantly time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimensions of QN are smaller than N, leading to the advantage that even TNC-size flanges can be used at QN connectors.
QLF- Quick Lock Connectors: XQN

QLF- Quick Lock Connectors: XQN

The newly developed HUBER+SUHNER XQN (eXtreme QN) is an advanced version of the standard QN connector. Besides the outstanding features of the QN connector, X-QN convinces with some extra advantages. Besides the RF signal path the coupling mechanism is completely waterproof thus protecting the connector from corrosion in a salty atmosphere and from freezing in case of high humidity in low temperatures. This extra features, additional to the excellent PIM performance (typically 162dBc) and the optimum power performance (~350 W by 2 GHz), makes this connector ideal as future-proof antenna connector.

Bayonet Connectors: BNC

Bajonet Connectors: BNC

Bajonet Connectors: BNC

HUBER+SUHNER 50 Ω BNC is still a popular connector serie, featuring a two stud bayonet coupling mechanism, which is particulary useful for grequently coupled and uncoupled RF connections with frequencies up to 4 GHz. 50 Ω BNC connectors and «Real» 75 Ω BNC connectors are suitable for applications up to 3 GHz, contrary to the conventional 75 Ω BNC connector types, which are applicable up to 1 GHz only. With the HUBER+SUHNER® full crimp technique, they can be assembled quick and easy to all convenient cable types. Thanks to good electrical properties they are suitable for different applications, such as broadcast, telecommunication, etc. Mechanically they are mateable with all conventional BNC connectors (50Ω and 75Ω).

Threaded Connectors: TNC

Threaded Connectors: TNC

Threaded Connectors: TNC

HUBER+SUHNER 50 Ω TNC connectors are threaded RF connectors applicable from DC up to 11 GHz. The threaded coupling mechanism improves control over the interface dimensions and allows them to be used under a higher environmental load than BNC, especially under a high vibration load. Within the internationally standardized TNC mating face dimensions a perfect 75 Ω characteristic impedance cannot be realized. However, at frequencies up to 1 GHz the small impedance deviation is negligible for practical applications. The threaded coupling mechanism allows them to be used under higher en-vironmental load than BNC. 50 Ω TNC connectors and 75 Ω TNC connectors are intermateable without restrictions.

Twinaxial Connectors: BNO / Triaxial Connectors: BNT

Twinaxial Connectors: BNO

Twinaxial Connectors: BNO

HUBER+SUHNER BNO twin connectors are two pin bayonet coupled (same bayonet locking mechanism as BNC) connectors for use with balanced twin-conductor cables with 75 Ω to 130 Ω impedance. They have polarized contacts and are not intermateable with BNC. The HUBER+SUHNER BNO twin connectors are suitable for applications up to 200 MHz (i.e. computer networks and process control).
Twinaxial Connectors: BNO

Triaxial Connectors: BNT

HUBER+SUHNER BNT triaxial connectors are RF connectors with a bayonet coupling mechanism and three concentric contacts (inner conductor, inner screen and outer screen) for triaxial cables. HUBER+SUHNER BNT connectors are intermateable with BNC connectors, but the inner conductor and outer screen are connected only. BNT connectors are suitable for applications up to 3 GHz (inner coaxial line).

High Voltage Connectors: SHV, MHV

High voltage Connectors: SHV

High Voltage Connectors: SHV

HUBER+SUHNER SHV (Safe High Voltage) connectors provide more secure handling: center contacts are well recessed to prevent shock hazards in unmated condition. All inner contacts are fully captivated and will withstand axial forces of 100 N minimum. When mating a connector pair the outer conductor contact is made prior to the inner conductor contacts. SHV connectors are suitable for all high voltage applications up to 5 kV DC or 3.5 kV rms. These connectors are typically used in nuclear instruments or test and measurement equipment. Voltages are valid for both, the mated and the unmated condition.
High voltage Connectors: MHV

High Voltage Connectors: MHV

HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kV rms test voltage (mated pairs). The MHV connectors have a working voltage up to 1.6 kV rms in mated condition and are suitable for applications up to 300 MHz. MHV connectors are of similar design to BNC connectors but the insulators protrude over the outer contacts to give a degree of contact-voltage proof when unmated. However, if a high degree of protection in the unmated condition is required, use of series SHV is recommended.

Mid Size Connectors: C, N, UHF

Mid Size Connectors: C

Mid Size Connectors: C

HUBER+SUHNER C connectors are medium size RF connectors with two-stud bayonet mechanism which allows quick and easy coupling and de-coupling. The C connectors provide 50 Ω impedance and the frequency range (connector interface) is specified for applications up to 11 GHz.
Mid Size Connectors: N

Mid Size Connectors: N

HUBER+SUHNER N connectors are available with 50 Ω and 75 Ω impedance. The frequency range extends to 18 GHz, depending on the connector and cable type. The screw-type coupling mechanism provides a sturdy and reliable connection. HUBER+SUHNER N connectors are available for flexible cables, for semi-rigid cables and for corrugated copper tube cables. Cable entries: clamp, crimp and solder types available, as well as HUBER+SUHNER QUICK-FIT for corrugated copper tube cables.
Mid Size Connectors: UHF

Mid Size Connectors: UHF

UHF connectors do not have defined impedance. They are intended for applications up to 200 MHz where mechanically robust connectors are required. They are mateable with 4 mm banana plugs.

Large Size Connectors: 7/16

Large Size Connectors: 7/16

Large Size Connectors: 7/16

HUBER+SUHNER 7/16 connectors are mechanically very rugged coaxial connectors with screw lock. They have a characteristic impedance of 50 Ω and are applicable with excellent electrical properties up to 7.5 GHz.Transmission of medium to high power in transmitting stations and low loss transmission of received signals such as in mobile phone base stations are typical applications. For these purposes lowintermodulation product and waterproof types are also available.

Low PIM Cell Site Connectors: Quick-fit (N & 7/16)

Low PIM Cell Site Connectors: Quick-fit (N & 7/16)

Low PIM Cell Site Connectors: Quick-fit (N & 7/16)

HUBER+SUHNER QUICK-FIT connectors are worldwide approved Nand 7/16 connectors for foam dielectric corrugated copper tube cables. They offer a greatly simplified and economic approach to cable preparation and assembly. The product line meets the requirements of multi-carrier, high-channel-count transceivers such as base stations of today’s mobile communication infrastructure networks. The cable entries support standard foam dielectric corrugated copper tube cables 1/2”, 7/8”, 11/4” and 15/8” and 1/2” highflex SUCOFEED as well as equivalent products from Andrew, RFS (Kabelmetal) and NK cables.

Reverse Polarity Connectors - Series N, SMA, TNC

Reverse Polarity Connectors - Series N, SMA, TNC

According UL FCC (part 15.203) regulations, wireless radio equipment with removable antenna must not have a standardized interface. This to avoid the connection of antenna equipment which is not WLAN approved. An established solution are the so called reverse polarity connectors. That means, the male connector is fitted with female centre contact and insulator, whereas the female side is fitted with male centre contact and insulator. For identification of reverse connectors the letter R (for reverse) is used in the type description. Example: 11_TNC-R50-3-42.

Hermetically Sealed RF Connectors

Hermetically Sealed RF Connectors

Hermetic is greek. It means impenetrable, barred, air and watertight, etc. The heart of a «hermetic» connector is a glass-seal. This is a center contact as well as a metal ring, which are separated and isolated by melted glass. The glass-seal is soldered into the connector body and is sealing the connector internally. Years of experience in development and production, as well as special equipment for soldering and testing the leak rate are reasons why HUBER+SUHNER is a competent and reliable manufacturer of hermetically sealed RF connectors.

Precision Multi Coax Connectors: MXP

Precision Multi Coax Connectors: MXP

Precision Multi Coax Connectors: MXP

The ganged multicoax solution MXP offers a true 40 GHz/ 40 Gbps coaxial-to-PCB transition with a very small form factor. Its reliable mating and ease of use make it especially suited for bench-top test systems as well as interconnect within automated test equipment. A broad range of configurations with highly flexible cable assemblies and compact PCB connectors are available.

Adaptors - Between and Within Series

Adaptors - Between and Within Series

Adaptors - Between and Within Series

HUBER+SUHNER manufactures a wide range of adapters to realise transitions from one interconnection interface to another. Our RF adaptor assortment covers all commercially available RF interfaces and configurations, frequency and return loss specification. Any RF coaxial adapter can be modified to fit specific applications.